$49.95 $56.90
| /
Make your garage smart with minimal effort and cash. Just attach the tilt sensor to your garage door and connect the ZEN16 to your existing door switch on the wall. You can control up to 3 doors with a single ZEN16 independently (but you'll need to get additional sensors to monitor them). Scroll down to the "Works with" section for dedicated hub instructions.
You don't need to touch any wiring at the garage opener. Just take the 2 wires from the door switch and attach them to the R1 terminals on the ZEN16. Connect the switch to the Sw1 terminals with another 2 wires, power the ZEN16 up and you're all set. Please make sure your existing opener doesn't have any smart or electronic features and is controlled by a simple momentary wall switch before buying.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this kit.
I have a Liftmaster garage door opener that has MyQ and it has been noting but a pain. I found a community entry on Hubitat that talked about a button that would replace the button I had for around $25, and they soldered 2 leads to it that were attached to the button so it simulates a button press.The relay & sensor were easy to install in my garage and it took about a half hour to install the hardware an get Hubitat set up. It's working great. Oh, the power supply some have had? I have a surge suppressor in the garage that powers an Ethernet switch, and a Wi-Fi access point. The surge suppressor has USB connectors on it so I just used the cable included and plugged it in there.
The Zooz DIY Smart Garage Opener Kit offers effortless installation and versatile functionality. With the MultiRelay ZEN16 VER. 2.0 and Tilt Sensor ZSE43, controlling my garage door has never been easier. Integration with my smart home platform was seamless, providing instant access via smartphone or voice commands. The kit's sturdy build instills confidence in its durability, while its responsiveness ensures prompt action. Overall, it's a highly recommended addition for those seeking streamlined garage access and peace of mind.
Just recently installed, so I can't comment on longevity. While the kit is well priced compared to another brand I’ve previously used, it's irritating that the power supply is included. It is working well and will see how long the tilt sensor works. This has been a weak point in the past. While the relay will operate 2 doors, I prefer not to have unsightly wires running to the 2nd door. Overall I'm happy with the purchase and would buy again.
The sensor paired easily and life seems good. It's been in service for a number of months and is still at 99% battery. The relay paired well and works from the dashboard. I added to the new C7 Hubitat when it was newly released, and I'm not sure the security was correct initially but that may have been due to the new hub.
Bought this to control 2 garage doors and get a warning if I left the garage door open overnight. The door will open and close and get a warning if either the door doesn't close or open from the sensor. However, there was no option to give a warning if the garage door was left open for a certain amount of time. Hopefully this will be added in future updates.